1. day-to-day care 4. repairing dents 3. product care 5. repairing small scratches 2. cleaning soiled areas All you need for the day-to-day cleaning (e.g. to remove crumbs) is a dry cotton cloth. If the wood is especially dirty, you may use a slightly damp cloth to clean the affected spot. However, immediately afterwards you should wipe the area with a dry cloth so that no moisture remains on the surface. Please do NOT use a microfibre cloth, grease-removing household cleaner or steam cleaner. ∤ Lightly soiled areas can be cleaned with hot water, furniture soap and a TEAM 7 cotton cloth (not too damp). ∤ Treat more heavily soiled surfaces or black spots (rubber marks) with the cleaning pad soaked in natural oil, by applying just a little pressure in the direction of the grain. Be careful around burrowing marks that the cleaning pad doesn’t get caught! Cover as much surface as you can to prevent colour variations. Let the oil absorb for no more than 10 minutes, otherwise the surface will stick. ∤ Use the dry TEAM 7 cotton cloth or a dry TEAM 7 sponge for burrowing marks to polish the wood thoroughly to remove excess oil and prevent sticking. Please do NOT use a microfibre cloth, grease-removing household cleaner or steam cleaner. ∤ To care for and freshen up the furniture surface, apply a thin and sparse layer of natural oil using a TEAM 7 cotton cloth or a dry TEAM 7 sponge in areas with burrowing marks. Let the oil absorb for no more than 10 minutes, otherwise the surface will stick. ∤ Use the dry TEAM 7 cotton cloth or a dry TEAM 7 sponge for burrowing marks to polish the wood thoroughly to remove excess oil and prevent sticking. Please do NOT use a microfibre cloth, grease-removing household cleaner or steam cleaner. ∤ Dampen dents and steam them ∤ out with a moist cloth and iron. ∤ The cloth must be sufficiently moist and the iron must not come into direct contact with the wood. Repeat several times if necessary. ∤ When the wood fibres have swollen and the wood is completely dry, polish it with sandpaper, starting with 150 grain, then 180 and finally 280 grain for the fine polishing. ∤ Apply a generous layer of the natural oil with the TEAM 7 cotton cloth or a dry TEAM 7 sponge in areas with burrowing marks. Let the oil absorb for no more than 10 minutes, otherwise the surface will stick. ∤ Use the dry TEAM 7 cotton cloth or a dry TEAM 7 sponge for burrowing marks to polish the wood thoroughly to remove excess oil and prevent sticking. Please do NOT use a microfibre cloth, grease-removing household cleaner or steam cleaner. see care video: www.team7-design.com/service/product-care-and-cleaning please note Oiled surfaces require around 20 days to harden completely. The surface must be protected against standing moisture during this time. Rinse and dispose of all oil-soaked cloths and scouring pads after use. DANGER OF SPONTANEOUS COMBUSTION! See information on the bottle. recommended care intervals 1 year: dining room (tables), kitchen (worktops, niche rear panel) 3 years: dining room (chairs, accessory furniture), kitchen (fronts) 5 years: living room (wall units, accessory furniture, coffee tables), bedroom (wardrobes, accessory furniture, beds), kids‘ bedroom (mobile) Or earlier depending on how frequently the furniture is used. ∤ Polish the surface with sand- ∤ paper with 120 grain until the ∤ ∤ ∤ scratch is no longer visible. You should always polish across large surfaces and in the direction of the wood fibre. Refine the surface with 150 grain, then 180 and finally 280 grain for the fine polishing. Be careful around burrowing marks to prevent getting caught! ∤ Apply a generous layer of the natural oil with the TEAM 7 cotton cloth or a dry TEAM 7 sponge in areas with burrowing marks. Let the oil absorb for no more than 10 minutes, otherwise the surface will stick. ∤ Use the dry TEAM 7 cotton cloth or a dry TEAM 7 sponge for burrowing marks to polish the wood thoroughly to remove excess oil and prevent sticking. Please do NOT use a microfibre cloth, grease-removing household cleaner or steam cleaner.
RkJQdWJsaXNoZXIy NTkyMTI=